Homepage | Login | Want to open an account?
Product Search
Quick Find

High flow rate Minisart®

High flow rate Minisart®
 Cat. NoDescrtiptionPack SizePriceQuantity
FS/63102 SYRINGE FILTER MINISART 0.45UM S PK50 £118.61
FS/63104 SYRINGE FILTER 0.45µM PK50 £122.17
FS/63106 SYRINGE FILTER 0.8µM PK50 £122.17
FS/63108 SYRINGE FILTER 1.2µM PK50 £122.17
FS/63110 SYRINGE FILTER MINISART 5UM S PK50 £122.17
FS/63112 SYRINGE FILTER MINISART PLUS 0.45UM S PK50 £144.22
FS/63114 SYRINGE FILTER MINISART 0.2UM NS PK500 £850.09
FS/63116 SYRINGE FILTER MINISART 0.2UM NS PK500 £850.09
FS/63118 SYRINGE FILTER MINISART 0.45UM NS PK500 £850.09
FS/63120 SYRINGE FILTER MINISART 0.8UM NS PK500 £850.09
FS/63122 SYRINGE FILTER MINISART 5UM NS PK500 £850.09
FS/63124 SYRINGE FILTER MINISART PLUS 0.45UM NS PK500 £855.17
FS/63126 SYRINGE FILTER MINISART PLUS 1.2UM NS PK500 £865.36
FS/63128 SYRINGE PRE-FILTER 0.2µM PK50 £71.26
FS/63130 SYRINGE FILTER MINISART GF NS PK500 £692.29

Filters for Particle Removal, Ultracleaning and Prefiltration Ready-to-use filter units with 0.45 ìm,0.8 ìm, 1.2 ìm or 5 ìm pore size membrane filters.
These independent filters fulfil your filtration requirements whenever volumes of up to 100 ml must be clarified or ultracleaned. They can also be used as prefilter in combination with a 0.2 ìm Minisart, increasing the total filterable volume.
The high flow rates of these units result from the large filter area and the very low flow resistance of the filter support, which is demonstrated by the relative constant increase in the flow rate with increasing pore size.
These flow rates contribute to user comfort by lowering the pressure required for filtration.
Minisart GF contains a glass fibre filter with a retention efficiency of 98% for 0.7 ìm spherical particles. It is very useful when relatively dirty solutions are to be clarified, or as a prefilter on an 0.2 ìm or 0.45 ìm Minisart. Minisart plus units also contain this glass fibre filter, but as prefilter on an 0.45 ìm or 1.2 ìm membrane, for higher total throughputs.
Specifications for Minisart, Minisart plus, and Minisart GF~
ConnectorsFemale luer lock inlet, male luer lock outlet (the 0.45µm unit is also available with a male luer lock outlet)
Application limitsMax. recommended operating pressure 4.5 bar (450kPa, 65 psi).
Housing burst pressure6 bar (600 kPa, 87 psi) and higher
Max. temperature50°C
Bubble pointManual measurement. Values determined by Sartocheck can be lower by 0.1-0.2 bar
Min. value with water2.0 bar (29 psi) (0.45 µm), 0.8 bar (12 psi) (0.8 µm), 0.7 bar (10 psi) (1.2 µm), 0.4 bar (6 psi) (5 µm), 0.5 bar (7 psi) (Minisart-GF)
Flow rateTypical values for water at.?D = 1 bar (100 kPa, 14.5 psi), 160 ml/min (0.45 µm), 350 ml/min (0.8 µm), 400 ml/min (1.2 µm), 500 ml/min (5 µm), 450 ml/min (Minisart-GF)
Colour codingYellow (0.45 µm), green (0.8 µm), red (1.2 µm), brown (5 µm), opaque (Minisart GF)
Filter diameter26 mm
Filter area5.3 cm2
MaterialsCellulose acetate membrane (except Minisart GF). Glass fibre filter (Minisart GF and Minisart plus). MBS polymerisate).
Hold-up volume0.1 ml
CytotoxicityNo detectable inhibition with MRC-5 (human lung cells)
Sterile Individually Wrapped




Your Order
Your cart is empty.


Please Note: All our prices are subject to VAT.
Tel England UK: +44 (0)15395 36830 ~ email: sales@eurodyne.co.uk
 | Tel Scotland UK: +44 (0)1355 239144 ~ email: eksales@eurodyne.co.uk